The Real Value in IP Video

The advent of IP systems and their relatively slow adoption rate -- comprising only 27 percent of the market today -- points to the fact that widespread acceptance of any product must be driven by the value it brings to its users.

This can be highlighted by the speed of the transition that took place from VCRs to DVRs in the 1990s. It was driven not by the technology, but by the value derived from that technology.

The DVR captured high-resolution images and retained them for significant amounts of time, at a price point that allowed them to compete in a typical VCR-style application. The value was obvious to industry stakeholders, and within a short period of time, the DVR became a critical component in almost every application.

In recent years, IP video has been one of the most talked about technologies in the security industry; however, the market remains dominated by analog systems. Early adopters of IP video systems found value by leveraging their internal network. The value was not in the IP CCTV system itself, but in the means of transmitting signals.

Historically, IP systems were challenged when compared to analog systems for several reasons:

IP camera images were not significantly better, yet they commanded a significant price premium.

  • Performance in low light was a challenge.
  • IP systems required an investment in IT infrastructure (servers, storage and bandwidth).
  • Most video management systems focused on large scale systems and didn’t scale down well.
  • IP systems were designed from an IT perspective and were far more complex to design, install and support than the typical analog system.

In other words, the security-conscious end user could not find much value in IP systems -- nor could the traditional CCTV integrator. And the hype surrounding IP over the past several years has simply not resulted in rapid adoption because of this critical value equation.

If IP is to achieve its promise, it must deliver real value to integrators and end users that is easy to see and to understand. A winning IP value formula is to provide high-quality video in an easy-to-use system that does not have a large adverse impact on network.

Technology That Drives Value
Do customers ask for IP, analog or hybrid systems? Or are they looking to solve issues in the most efficient and cost-effective way possible? The typical end user is searching for a solution to their problems -- but they’re not looking for a specific technology. Integrators and manufacturers tend to put technology first and value second.

Today, IP is beginning to drive value. The advent of 720p/1080p technology is introducing cameras that provide a quality of picture that is simply better and more easily demonstrated. Suppliers are developing technologies that can maintain this high-quality image in low light -- normally a significant barrier to adoption. In addition, compression technologies are driving the cost of network infrastructure and storage down dramatically. And all of this is occurring as market prices begin to seriously compete with analog systems.

As manufacturers find ways to improve the performance of IP cameras, it is important to remember that they are only part of the solution. Video management software also plays a critical role in driving value.

Upon review of most video management systems on the market, it appears they have grown out of the IT industry.

The setup, programming and maintenance feel like other IT products. This does not translate well into the security space, whose players have been raised on analog systems that are easy to install.

Additionally, end users with a working knowledge of an analog system or DVR may not have the skill-set required to make a smooth transition to IP video management solutions. We face competing choices; either sell and use the product you know you can manage efficiently, or invest in the training and certifications necessary to install, manage, support and use an IP video management system. The migration from analog to IP can be daunting in many arenas that are key to end users.

In mass market style applications, how many end users have IT departments suited to support IP systems?

The best way to overcome these challenges is for suppliers to provide video management systems that are so easy to set up, install, support and use that they blur the line between analog and IP. Usually, users do not care how the data is transmitted. They care much more about the quality of the data and their own ability to use and manage it effectively without an IT specialist.

Most video management systems are designed for large-scale solutions at organizations with IT departments. The security world has been challenged to adopt technologies that drive costs up, but effectiveness -- and profits -- down.

And the largest portion of the surveillance market is not large-scale systems. Attempting to fit a large-scale system into a scaled-down market is difficult, time consuming and expensive.

Creating video management solutions that incorporate wizards, pre-set configurations, self-enrollment of cameras and other ease-of-use software is commonplace in other arenas, but not security. The adoption of standards such as ONVIF and PSIA also will dramatically reduce the complexity of the installation and affect an integrator’s ability to offer long-term support.

We are in a time when integrators and end users can find video management systems designed as security platforms instead of IT platforms, and IP cameras can provide a total cost of ownership that rivals analog systems.

And we’ve entered a time when IP systems finally deliver on the hype.

A solution for an end user should never be technology for technology’s sake; it should drive real, demonstrable value. This is when technology drives rapid adoption. The transition from analog systems to IP systems begins with finding the real value in IP video.

This article originally appeared in the issue of .

About the Author

Scott Harkins is the vice president of sales and channel marketing, Americas, at Resideo.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • New Research Shows a Continuing Increase in Ransomware Victims

    GuidePoint Security recently announced the release of GuidePoint Research and Intelligence Team’s (GRIT) Q1 2024 Ransomware Report. In addition to revealing a nearly 20% year-over-year increase in the number of ransomware victims, the GRIT Q1 2024 Ransomware Report observes major shifts in the behavioral patterns of ransomware groups following law enforcement activity – including the continued targeting of previously “off-limits” organizations and industries, such as emergency hospitals. Read Now

  • OpenAI's GPT-4 Is Capable of Autonomously Exploiting Zero-Day Vulnerabilities

    According to a new study from four computer scientists at the University of Illinois Urbana-Champaign, OpenAI’s paid chatbot, GPT-4, is capable of autonomously exploiting zero-day vulnerabilities without any human assistance. Read Now

  • Getting in Someone’s Face

    There was a time, not so long ago, when the tradeshow industry must have thought COVID-19 might wipe out face-to-face meetings. It sure seemed that way about three years ago. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • Hanwha QNO-7012R

    Hanwha QNO-7012R

    The Q Series cameras are equipped with an Open Platform chipset for easy and seamless integration with third-party systems and solutions, and analog video output (CVBS) support for easy camera positioning during installation. A suite of on-board intelligent video analytics covers tampering, directional/virtual line detection, defocus detection, enter/exit, and motion detection. 3

  • EasyGate SPT and SPD

    EasyGate SPT SPD

    Security solutions do not have to be ordinary, let alone unattractive. Having renewed their best-selling speed gates, Cominfo has once again demonstrated their Art of Security philosophy in practice — and confirmed their position as an industry-leading manufacturers of premium speed gates and turnstiles. 3

  • Camden CM-221 Series Switches

    Camden CM-221 Series Switches

    Camden Door Controls is pleased to announce that, in response to soaring customer demand, it has expanded its range of ValueWave™ no-touch switches to include a narrow (slimline) version with manual override. This override button is designed to provide additional assurance that the request to exit switch will open a door, even if the no-touch sensor fails to operate. This new slimline switch also features a heavy gauge stainless steel faceplate, a red/green illuminated light ring, and is IP65 rated, making it ideal for indoor or outdoor use as part of an automatic door or access control system. ValueWave™ no-touch switches are designed for easy installation and trouble-free service in high traffic applications. In addition to this narrow version, the CM-221 & CM-222 Series switches are available in a range of other models with single and double gang heavy-gauge stainless steel faceplates and include illuminated light rings. 3